واحة دبي للسيليكون, Dubai
Brand
CiscoQuantity
Cisco 3925E router w/SPE200,4GE,3EHWIC,3DSP,2SM,256MBCF,1GBDRAM,IPB
Model:
CISCO3925E/K9 Cisco 3925E Router 3925-E ISR G2
Brand:
Cisco
CISCO3925E/K9 Overview
The Cisco 3925E router is designed for large branch offices, which delivers modular Services Performance Engine (SPE) 200.
Quick Specs
Table 1 shows the Quick Specs of the CISCO3925E/K9.
Product Code
CISCO3925E/K9
Services Performance Engine module
w/SPE 200
Rack Units
3U
Interfaces
4 integrated 10/100/1000 Ethernet ports with 2 SFP ports
Expansion Slot(s)
2 service module slots
3 onboard digital signal processor (DSP) slots
3 Enhanced High-Speed WAN Interface Card (EHWIC) slots
RAM
1 GB (installed) / 2 GB (max)
Flash Memory
256 MB (installed) / 8 GB (max)
Dimensions
47.6 cm x 43.8 cm x 13.3 cm
Package Weight
23.52 Kg
Product Details
Note:
①
②
③
On/Off switch
Power connector
LEDs area
Table 2 shows the LEDs area description.
LED
Description
SYS status LED
Solid green
Solid green indicates normal operation.
Blinking green
System is booting or is in ROM monitor mode.
Amber
System error.
Off
Power is off or system board is faulty.
ACT status LED
Solid or blinking green
Solid or blinking indicates packet activity between the forwarding and routing engine and any I/O port.
Off
No packet transfers are occurring.
POE
Green
IP phone power is on.
Amber
IP phone power is not on.
PS1 / PS2
Green
System is running.
Amber
System is not running.
Note:
①
Compact flash 0 and 1 (0, right)
⑤
S (Speed)
②
PVDM3 0,1, and 2 (0, far right)
⑥
L (Link)
③
EN (Enable USB console)
⑦
SFP S
④
EN (Enable RJ-45 console)
⑧
SFP EN
Table 3 shows the description of these LEDs on the back panel.
LED
Color
Description
Location
CompactFlash 1
Green
Flash memory is busy.
Back Panel
Amber
Initialized with error.
Blinking Green then turns off
CompactFlash is ready for removal.
CompactFlash 0
Green
Flash memory is busy.
Back Panel
Amber
Initialized with error.
Blinking Green then turns off
CompactFlash is ready for removal.
S (Speed)
1 blink + pause
GE port operating at 10 Mb/s.
Back Panel
2 blink + pause
GE port operating at 100 Mb/s.
3 blink + pause
GE port operating at 1000 Mb/s.
L (Link)
Green
GE link is established.
Back Panel
Off
No GE link is established.
EN (RJ-45 console port)
Green
The RJ-45 console port is active.
Back Panel
EN (USB serial console port)
Green
The USB console port is active.
Back Panel
PVDM3 0,1, and 2
Green
PVDM is initialized.
Back Panel
Amber
PVDM is detected but not initialized.
Off
No PVDM installed.
SFP S
Blinking green
Blinking frequency indicates port speed.
Back Panel
SFP EN
Off
Not present.
Back Panel
Green
Present and enabled.
Amber
Present with failure.
Note:
①
EHWIC 0,1, and 2 (0, far right)
⑦
SFP 1 and SFP 2 (1, Top)
②
USB serial port
⑧
USB 0 and USB 1 (1, Left)
③
AUX port
⑨
Ground
④
RJ-45 serial console port
⑩
Service module slots
⑤
10/100/1000 Ethernet ports (GE 0/3, Top; GE 0/2, Bottom)
Compact flash 0 and 1 (0, right)
⑥
10/100/1000 Ethernet ports (GE 0/1, Top; GE 0/0, Bottom)
The Cisco 3900 Series offers field-replaceable SPEs which allow you to protect your initial investment in the Cisco 3900 platform for a longer time period and scale router performance as your network and branch-office needs grow.
Modularity Features
The Cisco 3925E router provides enhanced modular capabilities.
Table 4 shows modules for this router.
Models
Description
C3900-SPE200/K9
Cisco Services Performance Engine 200 for Cisco 3925E ISR
(It’s a configured item in the CISCO3925E/K9.)
SM-ES3G-16-P
Enhanced EtherSwitch Service Module, L2/L3 switching, 16* 10/100/1000 GE ports, Enhanced POE, Cisco EnergyWise technology
SM-ES3G-24-P
Enhanced EtherSwitch Service Module, L2/L3 switching, 24 * 10/100/1000 GE ports, Enhanced POE, Cisco EnergyWise technology
VWIC3-2MFT-G703
Cisco Voice/WAN Card VWIC3-2MFT-G703
HWIC-2T
2-Port Serial WAN Interface Card Cisco Router High-Speed WAN Interface card
EHWIC-1GE-SFP-CU
Cisco 1900, 2900, 3900 Router EHWIC WAN Card EHWIC-1GE-SFP-CU
EHWIC-4ESG
Four port 10/100/1000 Base-TX Gigabit Ethernet switch interface card for Cisco 1900 2900 3900 Routers
ISM-SRE-300-K9
Internal Services Module (ISM) with Services Ready Engine
PVDM3-16
16-channel high-density voice DSP module
MEM-CF-256U1GB
256MB to 1GB Compact Flash Upgrade for Cisco 1900,2900,3900
MEM-CF-256U2GB
256MB to 2GB Compact Flash Upgrade for Cisco 1900,2900,3900
MEM-CF-256U512MB
256MB to 512MB CF Upgrade for Cisco 1900,2900,3900 ISR
MEM-CF-256U4GB
256MB to 4GB Compact Flash Upgrade for Cisco 1900,2900,3900
MEMUSB-1024FT
1GB USB Flash Token
Compare to Similar Routers
Table 6 shows the comparison of Cisco 3900 Series Routers’ four K9 models.
Model
CISCO3925/k9
CISCO3945/k9
CISCO3925E/k9
CISCO3945E/k9
SPE
w/SPE 100
w/SPE 150
w/SPE 200
w/SPE 250
Interface
3GE
3GE
4GE
4GE
EHWIC slots
4
4
3
3
SM slots
2
4
2
4
ISM slots
1
1
0
0
DSP
4
4
3
3
SFP
2
2
2
2
Rack Unit
3U
3U
3U
3U
Get more information
CISCO3925E/K9 Specification
CISCO3925E/K9 Specification
Embedded hardware-based cryptography acceleration (IPSec + Secure Sockets Layer [SSL])
Yes
Cisco Unified Communications Manager Express Sessions**
400
Cisco Unified SRST sessions
1350
Total onboard WAN or LAN 10/100/1000 ports
4
RJ-45-based ports
4
SFP-based ports
2
Service-module slots
2
Doublewide service-module slots
1
EHWIC slots
3
Doublewide EHWIC slots
1
ISM slots
0
Online insertion and removal (OIR)
Services modules
Onboard DSP (PVDM) slots
3
Memory DDR2 ECC DRAM: Default
1 GB
Memory DDR2 ECC DRAM: Maximum
2 GB
Compact Flash (external): Default
Slot 0: 256 MB
Slot 1: None
Compact Flash (external): Maximum
Slot 0: 4 GB
Slot 1: 4 GB
External USB 2.0 slots (Type A)
2
USB console port (Type B) (up to 115.2 kbps)
1
Serial console port (up to 115.2 kbps)
1
Serial auxiliary port (up to 115.2 kbps)
1
Power-supply options
Internal : AC, PoE, and DC*
Redundant power supply
Internal: AC, PoE, and DC*
Power Specifications
AC input voltage
100 to 240 VAC autoranging
AC input frequency
47 to 63 Hz
AC input current range, AC power supply (maximum)
7.1 to 3.0A
AC input surge current
<50A
DC Operating Input Voltage
24Vdc – 60Vdc
Max Input Current range, DC power supply
33.2 – 12.4
DC Input Surge Current
<50A
Typical power (no modules) (watts)
150
Maximum power with AC power supply (watts)
420
Maximum power with PoE power supply (platform only) (watts)
420
Maximum endpoint PoE power available from PoE power supply (watts)
520
Max power with DC input (W)
446
Maximum endpoint PoE power capacity with PoE boost (watts)
1040
Dimensions (H x W x D)
5.25 x 17.25 x 18.75 in.
(133.35 x 438.15 x 476.25 mm)
Rack height
3RU
Rack-mount 19in. (48.3 cm) EIA
included
Rack-mount 23in. (58.4 cm) EIA
optional
Wall-mount
No
Weight with AC power supply (no modules)
39 lb (17.7 kg)
Weight with PoE power supply (no modules)
40 lb (18.1 kg)
Typical weight (with modules)
60 lb (27.2 kg)
Airflow
Back to front
Optional airflow kit (includes filter)
None
Environmental specifications
Operating conditions
Temperature: 5906 ft (1800m) maximum altitude
32 to 104ºF (0 to 40ºC)
Temperature: 9843 ft (3000m) maximum altitude
32 to 104ºF (0 to 40ºC)
Temperature: 13123 ft (4000m) maximum altitude’
32 to 86ºF (0 to 30ºC)
Temperature: Short-term per NEBS/5906 ft (1800m) maximum altitude
23 to 122°F (-5 to 50°C)
Altitude
4000m (13000 ft)
Relative humidity
5 to 85%
Short-term (per NEBS) humidity
5% to 90%, not to exceed 0.024 kg water/kg of dry air
Acoustic: Sound pressure (typical/maximum)
57.6/77.6
Acoustic: Sound power (typical/maximum)
67.8/84.7
Nonoperating conditions
Temperature
-40 to 158ºF (-40 to 70ºC)
Relative humidity
5 to 95%
Altitude
15,584 ft (4570m)
Regulatory and Compliance
Safety
UL 60950-1
CAN/CSA C22.2 No. 60950-1
EN 60950-1
AS/NZS 60950-1
IEC 60950-1
EMC
47 CFR, Part 15
ICES-003 Class A
EN55022 Class A
CISPR22 Class A
AS/NZS 3548 Class A
VCCI V-3
CNS 13438
EN 300-386
EN 61000 (Immunity)
EN 55024, CISPR 24
EN50082-1
Telecom
TIA/EIA/IS-968
CS-03
ANSI T1.101
ITU-T G.823, G.824
IEEE 802.3
RTTE Directive