UB series UPS is a single-phase uninterruptible power supply with double-conversion technology and DSP control. It delivers a rated power of 6-10kva and can be used in both tower and rack configurations. The patented minic LCD screen can be rotated according to different type of deployment.

General Features

● True double-conversion

● Rack-mounted and floor-standing tower can be convertible

● Patented Minic LCD of which content can be rotated according to the type of deployment

● DSP technology guarantees high reliability

● N+X parallel redundancy

● Selectable quantity of battery for each group:16/18/20 pieces

● Adjustable charging current via LCD

● 3-stage charging design optimizes battery performance

● ECO mode operation for energy saving

● Self-diagnosis at startup

● Emergency power off function(EPO)

● Maintenance bypass is convenient for maintenance

● Generator compatible

● PDU is convenient for connecting load

● Communications:RS-232,USB,SNMP card(Optional), Relay card (Optional)

● Cold start

Technical Specification

MODEL

UBR60L

UBR100L

Capacity (VA/Watts)

6K / 5.4K

10K / 9K

INPUT

Nominal Voltage

220/230/240Vac(L+N+PE)

Operating Voltage

Range

120Vac-276Vac

Operating Frequency

Range

50Hz：45~55Hz，60Hz：54~66Hz

Power Factor

≥0.99

Bypass Voltage Range

Max.voltage:  220V：+25%(Optional +10%,+15%,+20% )

230V：+20%(Optional +10%,+15%)

240V：+15%(Optional +10% )

Min. voltage: -45% (Optional -20%,-30%)

ECO Range

Same as bypass

Harmonic Distortion

(THDi)

≤5%(100% non-linear load)

OUTPUT

Output Voltage

220/230/240Vac

Power Factor

0.9

Voltage Regulation

±1%

Frequency

Line Mode

±1%/±2%/±4%/±5%/±10% of the rated frequency(Optional)

Bat. Mode

(50/60±0.1)Hz

Crest Factor

3:1

Harmonic Distortion

(THDv)

≤2% with linear load

≤5% with non-linear load

Waveform

Pure Sinewave

Transfer Time

Utility to Battery : 0ms; Utility to Bypass: 0ms

EFFICIENCY

Efficiency

Up to 94%

BATTERY

Battery Voltage

Optional Voltage: ±96/108/120Vdc

Typical Recharge Time

6-8 hours (To 90% capacity)

Charging Current

Maximum current 10A;

PROTECTION

Overload

Line Mode

Load≤125%: last 5min;≤150%: last 1min;＞150% 200ms turn to bypass mode

Bypass Mode

40A(Input breaker)

60A(Input breaker)

Short Circuit

Hold Whole System

Overheat

Line Mode: Switch to Bypass; Backup Mode: Shut down UPS immediately

Battery Low

Alarm and Switch off

INDICATORS

Audible & Visual

alarms

Line Failure, Battery Low, Overload, System Fault

Status LED & LCD

Display

Line Mode, Backup Mode, Eco Mode, Bypass Mode, Battery Low, Battery Bad, Overload & UPS Fault

Reading On The LCD

Display

Input/Output Voltage, Input/Output Frequency, Load Level, Battery Level, Inner

Temperature & Remaining Battery  Backup Time

MANAGEMENT

Communication

Interface

RS232,USB, Parallel Port, SNMPcard(Optional), Relay card (Optional)

ENVIRONMENT

Operating

Temperature

0℃～40℃

Storage Temperature

-25℃～55℃

Humidity Range

0～95% (Non-condensing)

Altitude

< 1500m

Noise Level

<55dB

PHYSICAL

Dimension

W×D×H (mm)

443×580×131 (3U)

Net Weight (kg)

19

20

STANDARDS

Noise Suppression

Complies with EN62040-2

Safety

IEC/EN62040-1,IEC/EN60950-1

EMC

IEC/EN62040-2,IEC61000-4-2,IEC61000-4-3,IEC61000-4-4,

IEC61000-4-5,IEC61000-4-6,IEC61000-4-8

BATTERY PACK

Model

EXBR±120V

Battery type&

Max.quantity

7Ah×20/9Ah×20

Dimensions

W×D×H (mm)

443×720×131 (3U)

Net Weight (kg)

65/75